Wireless handsfree car speakerphone with auto on/off and voice dial
/
$29.99
FREE shipping and returns
SHIPPING
We have warehouses located in the US, EU, Canada, and Australia; orders placed in other regions will be delivered via international shipping.
Purchases from Avantree.com gets 2-year warranty
CONVERSE CLEARLY - Advanced CSR Bluetooth 5.0 chipset, built-In 3W speakers echo & background noise-reduction feature and volume controls- your calls will be crystal clear no matter where you are!
DISTRACTION FREE DRIVING - Encourages safe driving by using Siri Assistant to make phone calls, send texts or get driving directions. Our CK11 also allows you to connect to 2 phones simultaneously & easily switch between music & calls!
DRIVE WITHOUT DELAY - Our motion sensor enabled CK11 allows you to turn your device to ‘Auto Power On’ so the device turns itself on when your car door opens and off when the Bluetooth disconnects.
LONG BATTERY LIFE - Get lost in your calls, music or driving directions with up to 22 hours of battery life! Feeling a little low? Avantree CK11 rechargeable battery charges in 2-3 hours and features over 600 hours of standby time.
PLACE. PROCEED. - Installation of CK11 is so easy your child can do it! Simply pair the device with your phone(s), place it on the visor with the included clip and be on your way to clear calls in the car!
The latest Bluetooth hands-free, visor-mounted car kit. One-button access to Siri or Google Assistant. Automatic power on and off with a powerful 3W speaker.
Clear calls
Voice control
Auto power on/off
Long battery life
Easy to use
Crystal clear calls
Features a powerful 3W internal speaker complete with echo & background noise reduction, enabling you to always hear your conversations clearly, no matter where you are. High-sensitivity, omni-directional microphone for the ultimate call clarity on both ends.
Voice control
One touch access to your personal voice assistant (Siri and Google Assistant). Easily make a call or ask for directions using your voice - allowing you to focus on driving.
Auto power on/off
For your ultimate convenience, the built-in motion sensor automatically powers on the car kit and connects to your device as you open the door. When you leave your car, the car kit will also power off and disconnect accordingly.
Long battery life
Immerse yourself in your calls, music, or driving directions with up to 22 hours of battery life. Rechargeable battery charges fully in 2-3 hours and provides over 600 hours of standby time.
Easy to use
Intuitive and simple controls. Use the rotary dial to adjust volume or pick up calls. Visor mount allows the car kit to be attached in both left and right orientations.
Step 1. Pair the first mobile phone. You can refer tothis guide to pair your first phone to the Roadtrip.
Step 2. Set the CK11 into pairing mode again - Press and hold for about 2 seconds until the status LED flashes BLUE and RED alternately. CK11 will disconnect with the first mobile phone.
Step 3. On 2nd mobile phone - Turn on Bluetooth, search and select “Avantree CK11” to connect.
Step 4. Tap “Avantree CK11” on the first mobile phone to reconnect them. And now, the CK11 should be connected to both mobile phones.
Note: If you cannot connect two mobile devices simultaneously to CK11 as above instructions, please check if the Multipoint Function is ON - Press and hold for 3 seconds to turn on the function.
Step 1. Power on CK11 by setting the toggle switch to ON.
Step 2. Press and hold the MFB for 3 seconds until LED indicators flashes BLUE and RED alternately with voice prompts "paring" to enter pairing mode.
Note: Normally on first use when you set the toggle switch to ON, it will automatically enter pairing mode. If not, you may also need to make it into pairing mode by press and hold the MFB button.
Step 3: Connect/Pair CK11 with your mobile phone.
On your phone, locate the Bluetooth settings and make sure that Bluetooth is turned on. Find the headphone/speaker/receiver and select “Avantree **CK11**” to pair them up.
If you can't get it pair with your mobile phone, please try to Factory Reset the CK11 and then try to pair again.
Please make sure your smartphone was CONNECTED with WIFI or WLAN/Mobile Data and CK11 is well connected with your phone, then follow the below steps according to your different phone(Android/iPhone) to enable the Voice Assistance/Siri on your phone first.
After above is complete, simply just short press the volume knob/MFB and you will hear a prompt tone indicating that the voice command is activated from CK11. Now you will be able to dial a phone number through the unit.
Note: If voice command is not activated on CK11, you'll need to use the phone speaker to ask for a number to be called.
For Android phones, please make the below settings:
Download Google Assistance
Open Google Assistance
Press the blue button in the top-right corner of the Google Assistant window
Tap the menu icon in the top-right corner of the Google Assistant window
Tap Settings
If you can't get into the Google assistance, you will not find the blue button in the top but you can also find it through Google. Please follow the bellow:
Open Google
Press in the right bottom of Google
Tap Settings bellow Google Assistance
Tap Voice Match - Teach the Assistance to recognize your voice. Then record your voice accordingly and completed. When completed, you can activate Google Assistance by the voice " OK Google".
Now it will dial use the name you have set up on your phone by voice. So if you have a contact listed as Home, and say "OK Google call home", it will call the number. Or you can also do some other voice commands(as above).
If you have several numbers on one contact, e.g. John Smith have two numbers for Work and Mobile. Google Assistance will ask which you want to call. Just answer and it will call out. (For some phones, it will not ask which one you want to call just call by default. In this case, we suggest you to save each number)
For ISO system(iPhone 6S and above,) please make the below settings:
Tap Settings
Tap Siri & Search
Open the below settings : Listen for "Hey Siri"/ Press Home for Siri / Allow Siri When Locked
Then you are required to Set Up "Hey Siri" through your voice. This helps Siri recognize your voice when you say "Hey Siri" .
Choose Continue and Say "Hey Siri" into the phone. After completed, you can activate Siri by the voice " Hey Siri".
Now it will dial use the name you have set up on your phone by voice. So if you have a contact listed as Jeremy, and say "Hey Siri call Jeremy", it will call the number. Or you can also do some other voice commands(as above).
If you have several numbers on one contact, e.g. if you have a contact listed as Alisha Chen with two numbers of work and home. Siri will ask which you want to call. Just answer and it will call out.